autocad change 3d drawing to 2d

AutoCAD 2022 and AutoCAD LT 2022 Bible

The virtually comprehensive AutoCAD book effectually!

Converting 3D drawings into 2D drawings

Readers of my books often ask me how to catechumen a 3D drawing into a 2d drawing — either to simplify dimensioning or for presentation purposes. Hither are three techniques:

If your drawing is made upwards of solids, you lot should use SOLVIEW and SOLDRAW or SOLPROF, because they provide the well-nigh accurate results.

• SOLVIEW automates the creation of floating viewports and orthogonal views of your model. SOLVIEW also creates a special layer for dimensioning. For a view that you have named "forepart," look for a layer chosen front-dim. Y'all can utilize these layers to create dimensions in paper space.
• SOLDRAW works with the views created past SOLVIEW and creates 2D profiles, including hatching for sections.
• SOLPROF requires that you create your own floating viewports and that y'all start on a layout in model space. This command then creates profiles. You can create hidden views by choosing Yes at the "Display hidden profile lines on separate layer?" prompt and then freezing or turning off the layers that represent hidden lines.

Height Customization Tips Every AutoCAD User Should Know

AutoCAD is meant to exist customized, simply customization is ane of the most complex features of AutoCAD. Gain the knowledge you need to be a primary at customizing AutoCAD!

If you drawing contains non-solids, your all-time bet is to create a DXB file (a binary file containing all the specifications of your cartoon) and then import that file into a new drawing. These results are non as accurate, but acceptable for about presentation purposes. Here are the steps:

1. Choose Tools > Wizards > Add Plotter. The Add Plotter wizard opens.
2. Click Next. On the Begin screen, choose the location for your plotter, My Figurer, Network Plotter Server, or System Printer. Click Adjacent.
3. On the Plotter Model screen, cull AutoCAD DXB File from the Manufacturers list. Click Next.
4. On the Import Pcp or Pc2 screen, click Next unless you lot want to import an existing plotter configuration file.
5. On the Ports screen, Plot to File should exist checked. Click Next.
6. On the Plotter Proper name screen, you can keep the default proper name (DXB File) or blazon a new name. Click Next and and so click Finish. Y'all accept now finished the setting up of the DXB plotter. You don't need to to this step over again.
7. In your drawing, set up the view yous want to plot.
8. Click a layout tab and create a floating viewport. (Past default the Folio Setup dialog box appears. Click OK to create one floating viewport.)
9. If y'all want a hidden view, select the viewport itself (the border). Correct click and choose Hide Plot > Yes. If you lot don't want the viewport border itself to appear, put it on a dissimilar layer and freeze the layer.
10. Choose Plot from the Standard toolbar. On the Plot Device tab, chose DXB File.pc3 (or any yous named your DXB plotter).
11. In the Plot to File section, proper noun your file and choose a location. (You tin click the ellipsis button to browse to a location.) Annotation that the Plot to File checkbox appears grayed out.
12. Click OK to create the DXB file.
13. Open up a new cartoon and choose Insert > Drawing Exchange Binary. Locate and cull the file y'all created and click Open up. (If you model is rotated, merely use the ROTATE command.) You now have a 2D representation of your 3D drawings, everything broken down into lines.

A new Limited Tools control is Flatten, which converts a 3D drawing to 2nd. The results depend on the viewpoint yous are using when you execute the command. For case, a cylinder viewed using the SE Isometric viewpoint becomes a prepare of polylines. If viewed from the acme, the cylinder becomes a circumvolve, considering that's what you run into. Since AutoCAD 2007, there's a similar FLATSHOT control.

For specific steps using SOLPROF, run across Convert a 3D solid to a 2nd cartoon with a hidden view

• Author
• Recent Posts

Ellen Finkelstein is the author of the all-time-selling AutoCAD & AutoCAD LT Bible, which started with R14. Ellen has written extensively on AutoCAD, including articles for Autodesk's website and features for AutoCAD's Help organisation. Ellen's showtime volume was AutoCAD For Dummies Quick Reference.

Social Media Connections

Describe faster and easier!

Summit 25 Productivity Tips Every AutoCAD® User Should Know

reynoldscoldid.blogspot.com

Source: https://allaboutcad.com/converting-3d-drawings-into-2d-drawings/

Share this post